ME

2 product code

ME

ME is a lubrication component for supplying or distributing oil or grease. Select the configuration according to the lubrication system and operating conditions.

Loading product code list…

Detailed technical content

Select the delivery mechanism for the lubrication point

Single-point lubricators may use a battery/electric drive or a mechanical spring mechanism. The ME and VRH300 series use battery power, while the S series uses a spring. These two principles differ in adjustment capability, delivery pressure, capacity and operating range.

Before selecting a unit, determine its mounting position, grease requirement over time, temperature, grease type and the back pressure of the supply line if the device is not mounted directly at the lubrication point.

Larger capacity does not always mean longer service time

Service time depends on both capacity and delivery rate. A unit with a large reservoir can still run out of grease quickly if set to a high delivery rate. For a programmable device, select the cycle according to the actual requirements of the bearing, chain or mechanism being lubricated rather than setting the longest duration simply to reduce replacement frequency.

Pressure and remote-mounting distance must be checked

Pressure loss is generally lower when the lubricator is mounted directly. If tubing is used to deliver grease to a remote point, tube length, diameter, grease type and temperature all increase resistance. Jianhe states that the ME125 can deliver grease over a maximum distance of 5 m under suitable conditions; the VRH300 has a higher maximum working pressure than the mechanical S series.

Do not apply a single remote-mounting distance to every device series.

FAQ

Frequently asked questions

When should a single-point lubricator be used instead of a centralized lubrication system?

A single-point lubricator is suitable for a few isolated or difficult-to-access points where a complete piping network is unnecessary. If a machine has many points requiring synchronized lubrication cycles, a centralized system is generally easier to manage and monitor. Base the choice on point count, distance and maintenance requirements.

Is a battery-powered lubricator always better than a mechanical spring-powered unit?

No. A battery-powered unit generally offers more flexible delivery control and may generate higher pressure depending on the model, while a spring-powered unit is simple, requires no electrical power and suits many basic positions. Select according to resistance, capacity, temperature, mounting space and required adjustment.

Can a lubricator be installed remotely and connected to the bearing by tubing?

This is possible with some models, but the exact device limits must be checked. Longer tubing, thicker grease or lower temperature increases resistance. For example, the manufacturer specifies a maximum transfer distance of about 5 m for ME125 under suitable conditions; this figure must not be applied to every single-point lubricator.

Can any grease be used as long as its cartridge fits the lubricator?

No. The device has limits for NLGI grade, temperature and pressure generation. For example, Jianhe specifies NLGI 1–2 grease for VRH300 and NLGI 0–2 for S60. When changing grease, check the exact model specifications and compatibility with the lubrication point.

News about Lubrication systems and grease