Single-row cylindrical roller bearing

785 product code

Single-row cylindrical roller bearing

Single-row cylindrical roller bearings is a bearing family for rotating machinery. Select the design according to load, speed, alignment and mounting requirements.

Loading product code list…

Detailed technical content

Locating function depends on flange design

An important characteristic of cylindrical roller bearings is that their axial function varies with the design. NU and N designs allow one ring to move axially relative to the other within the bearing, so they are commonly suitable for a non-locating position when the shaft must accommodate thermal expansion. Designs with flanges such as NJ or NUP can also provide axial locating in one or both directions within their design limits.

Caged or full-complement rollers

A caged bearing spaces the rollers apart and is better suited to applications requiring high speed and controlled friction. A full-complement design uses more rollers, increasing radial load capacity, but normally sacrifices limiting speed and increases friction compared with a caged design.

Four-row series are used where very high radial load capacity and rigidity are required, typically in certain rolling equipment or heavily loaded shaft assemblies. Selection must clearly identify the bearing’s function in the shaft system, load, speed and axial-displacement requirement.

Installation and replacement

Many cylindrical roller bearings are separable, allowing each ring to be mounted independently when an interference fit is required on both the shaft and housing. However, identical dimensions do not mean identical function: changing from NU to NJ/NUP, or from a caged to a full-complement design, can change the locating capability and operating conditions of the complete assembly.

FAQ

Frequently asked questions

Can an NU bearing be replaced by an NJ or NUP bearing when the dimensions match?

Not on dimensions alone. NU, NJ and NUP designs have different flange arrangements and therefore different axial-locating functions. An incorrect design can change how the shaft accommodates thermal expansion or how axial load is transmitted through the machine.

Why is a full-complement design not always better than a caged cylindrical roller bearing?

A full-complement bearing offers higher radial-load capacity because it contains more rollers, but roller-to-roller contact increases friction and usually limits speed. For high-speed machinery, a caged design may be more suitable even if its rated load is lower.

When should a four-row cylindrical roller bearing be considered?

A four-row design suits positions requiring very high radial-load capacity and rigidity, commonly in heavy industrial roll arrangements. Selection must still consider the load, speed, shaft construction and mounting requirements of the specific equipment.

Can a cylindrical roller bearing serve as the non-locating bearing for shaft thermal expansion?

Yes, with suitable designs such as NU or N, axial displacement can take place inside the bearing. This helps accommodate thermal expansion without allowing a bearing ring to slide on its seat. The permissible displacement of the exact designation must be checked.

News about Bearings