Compact SKF TIH 030M induction heater for bearings weighing up to 40 kg
•Compact design; weighing only 21 kg (46 lb) for easy transport
•Can heat a 28 kg (62 lb) workpiece in 20 minutes.
•Supplied as standard with three yokes, enabling bearings with bore diameters from 20 mm (0.8 in.) and weights up to 40 kg (90 lb) to be heated
Features and benefits
The SKF induction heater range efficiently heats bearings and workpieces, both large and small. Its innovative design provides significant advantages for owners and operators:
• Advanced power electronics with precise current control help regulate the rate of temperature increase
• Two-step power settings (50% / 100%) allow small bearings to be heated safely with lower energy consumption
• Overheating protection reduces the risk of damage to the induction coil and electronics, improving reliability and safety.
• Automatic demagnetisation reduces the risk of iron-particle contamination after heating
• Available in different voltage variants to suit most operating voltages worldwide
• Supplied with heat-resistant gloves to improve operator safety
A: The induction coil is located outside the heater housing, enabling shorter heating times and lower energy consumption
B: Foldable bearing support arms allow larger-diameter bearings to be heated and reduce the risk of the bearing tipping during heating
C: A magnetic temperature probe combined with the preset 110 °C (230 °F) temperature mode helps prevent bearing overheating
E: Yokes are stored in the housing, reducing the risk of loss.
F: The integrated handle makes the heater easy to move around the workshop
G: Sliding or swivel arms enable easy, fast bearing replacement and reduce operator fatigue (not available for TIH 030m)
=>>> Read more: SKF TKTL 11 infrared thermometer.
Technical specifications
Designation: |
TIH 030m |
Maximum heating weight: |
40 kg (88 lb) |
Heating diameter range: |
20–300 mm (0.8–11.8 in.) |
Heating area (width × height): |
100 × 135 mm (3.9 × 5.3 in.) |
Magnetic core diameter: |
95 mm (3.7 in.) |
Standard yokes (included) for the minimum workpiece bore diameter: |
65 mm (2,6 in.) |
40 mm (1.6 in.) |
|
20 mm (0.8 in.) |
|
Equipment performance example (bearing, weight, temperature, time): |
23136 CC/W33, 28 kg, 110 °C, heated in 20 minutes |
Maximum power: |
2,0 kVA |
Voltage: |
|
100–120 V/50–60 Hz: |
TIH 030m/110 V |
200–240 V/50–60 Hz: |
TIH 030m/230 V |
400–460 V/50–60 Hz: |
– |
Temperature control range: |
20 to 250 °C (68 to 482 °F) |
Demagnetisation according to SKF standard: |
less than 2 A/cm |
Dimensions (w × d × h): |
460 × 200 × 260 mm |
Total weight (including yokes): |
20,9 kg (46 lb) |
Where to buy a genuine SKF TIH 030M induction heater?
- LDT Vietnam is the first choice for customers buying genuine SKF products in Vietnam.
- LDT Vietnam Industrial Joint Stock Company is a leading supplier of SKF lubrication products and systems in Vietnam. Products supplied by LDT Vietnam have a particularly competitive position in the Vietnamese market.
- LDT Vietnam is the first and only authorised distributor in northern Vietnam appointed by SKF to distribute Lincoln & Alemite products and lubrication systems.
- With a business philosophy focused on the success of every partner, we believe that our partners’ success is our own success.
Dear customers, contact LDT now using the information below for advice and special offers!
===================================
Address: 121-123 To Hieu Street, Nguyen Trai Ward, Ha Dong District, Hanoi, Vietnam
Sales hotline: Mr Toan: 0948.068.692
Fanpage: https://www.facebook.com/BoitroncongnghiepSKF?ref=embed_page
